Choose your country or region.

Close
0 Item(s)

Newest Products

KITXMC48IOTAWSWIFITOBO1 Base Kit Featuring an XMC4800 MCU
KITXMC48IOTAWSWIFITOBO1 Base Kit Featuring an XMC4800 MCU2018-12-31

KITXMC48IOTAWSWIFITOBO1 Base Kit Featuring an XMC4800 MCU Infineon's KITXMC48IOTAWSWIFITOBO1 kit based on the XMC4800 MCU and includes Arduino and Click Board™ compatible form factors Infineon's KITXMC48IOTAWSWIFITOBO1 is a base kit featuring an XMC4800 MCU and includes connectors in Arduino and ...

Surface Mount Fuse Clips with Kapton® Tape
Surface Mount Fuse Clips with Kapton® Tape2018-12-28

Surface Mount Fuse Clips with Kapton® Tape Keystone’s Kapton enhanced products are supplied on tape and reel per ANSI/EIA-481 standard Keystone’s surface mount fuse clips with Kapton tape across the top surface allow for a more secure part picked-up by vacuum pick-and-place assembly systems. Ka...

ADMV1010/ADMV1011/ADMV1012/ADMV1014 MMIC Wideband Microwave
ADMV1010/ADMV1011/ADMV1012/ADMV1014 MMIC Wideband Microwave2018-12-28

ADMV1010/ADMV1011/ADMV1012/ADMV1014 MMIC Wideband Microwave Analog Devices' downconverters/upconverters for test, measurement, and radio applications ADI's ADMV1010, ADMV1011, ADMV1012, and ADMV1014 are compact, gallium arsenide (GaAs) design, monolithic microwave integrated circuit (MMIC), I/Q do...

ADXL1003 MEMS Accelerometer with Wide Bandwidth and Low Noise
ADXL1003 MEMS Accelerometer with Wide Bandwidth and Low Noise2018-12-28

ADXL1003 MEMS Accelerometer with Wide Bandwidth and Low Noise Analog Devices’ sensor products for predictive maintenance, asset health, and condition-based monitoring ADI’s ADXL1003 is a low noise, wide bandwidth, microelectronic mechanical systems (MEMS) accelerometer. It has typical noise dens...

TMC5161 cDriver™ ICs
TMC5161 cDriver™ ICs2018-12-28

TMC5161 cDriver™ ICs Trinamic's fully integrated TMC5161 cDriver IC features an integrated motor controller and driver for 2-phase stepper motors Trinamic Motion Control's TMC5161 cDriver solution is an easy to use building block with a powerful integrated MOSFET driver stage and complete motion ...

ADP1071 Synchronous Flyback Controllers with iCoupler® Technology
ADP1071 Synchronous Flyback Controllers with iCoupler® Technology2018-12-28

ADP1071 Synchronous Flyback Controllers with iCoupler® Technology Analog Devices' power devices for isolated dc-to-dc power supplies found in telecom, industrial, and PoE applications Power by Linear / Analog Devices’ ADP1071 are pulse-width modulation (PWM) current mode fixed frequency synchron...

PI4ULS5V108 Bidirectional 8-Bit Level Shifter
PI4ULS5V108 Bidirectional 8-Bit Level Shifter2018-12-27

PI4ULS5V108 Bidirectional 8-Bit Level Shifter Diodes’ 8-bit bidirectional level shifter for open-drain and push-pull applications Diodes’ PI4ULS5V108 supports up- to 100 MHz up-translation and greater than 100 MHz down-translation at ≤ 30 pF cap load and up to 40 MHz up/down translation at 50 p...

GaN Semiconductors
GaN Semiconductors2018-12-27

GaN Semiconductors EPC's GaN semiconductors are the core of large surface area wireless power EPC’s 100 V EPC2107 and 60 V EPC2108 eGaN half-bridge power integrated circuits with integrated bootstrap FET eliminate gate driver induced reverse recovery loses as well as the need for a high side clam...

MP6500 and MP6600 Stepper Motor Drivers
MP6500 and MP6600 Stepper Motor Drivers2018-12-26

MP6500 and MP6600 Stepper Motor Drivers Monolithic Power Systems' stepper motor drivers feature a built-in translator and current regulation The MP6500 and MP6600 from MPS are stepper motor drivers with a built-in translator and current regulation. Current sensing is internal and requires no exter...

MP5032 USB Port Controller
MP5032 USB Port Controller2018-12-26

MP5032 USB Port Controller Monolithic Power Systems' quick-charge (QC 3.0) USB switch features a charging port identification circuit The MP5032 from MPS integrates a USB current-limit switch and charging port identification circuit. The MP5032 achieves 3 A of continuous output current over a wid...

LM2904LV Op-Amps
LM2904LV Op-Amps2018-12-26

LM2904LV Op-Amps Texas Instruments' cost-optimized op amps are suitable for a wide range of general purpose and single-supply applications Texas Instruments' dual LM2904LV op-amp operates from a low voltage of 2.7 V to 5.5 V. It provides an alternative to the LM2904 in low-voltage applications t...

Zynq® UltraScale+™ MPSoC Family
Zynq® UltraScale+™ MPSoC Family2018-12-26

Zynq® UltraScale+™ MPSoC Family Xilinx's MPSoC family offers solutions for EG/EV devices with Trenz SoMs Xilinx's Zynq UltraScale+ MPSoC offers a dual(CG) and quad(EG/EV) core Arm® Cortex®-A53 application processor, a dual-core Arm Cortex-R5 real-time processor, and Mali™-400 MP2 graphics pr...